50kW Load Bank, 50kW 415VAC Resistive Load bank

● The 50kW 415V AC Resistive Load Bank is used to test generator or UPS, also can be used as dummy load to keep the generators load level, to protect generators work healthly.
● The rated load voltage is 415VAC 3phase 60Hz.

● SELECTION OF STEPS LOAD : Manual Control

● TYPE OF SERVICE: Continuous (24 hrs / 7 days)

● TYPE OF VENTILATION :  Forced air cooling.

● ALTITUDE: Designed for an altitude of up to  1500 masl.

● ELEMENT HEATER : ZENITHSUN uniquely designed high-power wirewound resistors.

● THREE PHASE STEPS : 2 KW, 5 KW, 10 KW, 10 KW, 20 KW

● Compliance with standards:
1) IEC 60529 Degrees of Protection Provided by Enclosures
2) IEC 60617 Graphical Symbols and Diagrams
3) IEC 60115 fixed resistor for use in electronic equipment
● Installation environment:
Installation Height: ≤1500 meters ASL,
Ambient Temp: -10℃ to +50℃ ;
Relative Humidiry: ≤85%;
Atmospheric Pressure: 86~106kPa.
The installion place of load bank should be dry and ventilative. There is no flammable, explosive and corrosive materials around load bank. Due to resistors are heaters, the temperature of the load bank will be higher and higher, there should be leave some space around the load bank, avoid the influence of outside heat source.
● Please note custom designs may be available. Please speak to a member of our sales team for more information.